UEE32220- Certificate III in Air Conditioning and Refrigeration

Put your training and experience to use with ITEC’s RPL services and earn a nationally recognised qualification with a UEE32220- Certificate III in Air Conditioning and Refrigeration via our RTO partners.

Qualification Overview

Qualification Name:

Certificate III in Air Conditioning and Refrigeration

Qualification Code and Units of Competency:

UEE32220

Duration:

Within four weeks of receiving sufficient and complying evidence of competency in all applied for units of competency.

This qualification of a UEE32220- Certificate III in Air Conditioning and Refrigeration provides the knowledge and skills required by an individual who wishes to work in the light vehicle automotive repair and service industry. Despite the specialized-sounding title, this is a general and highly practical degree for any person looking to get involved in the automotive mechanic industry. You will be qualified to tackle such universally important tasks as engine and transmission repairs, maintenance on steering, and other vital vehicle systems, especially on consumer automobiles.

Qualified workers in this trade often find themselves with opportunities to advance into a specialist position through their work, or in establishing their own mechanics’ business. Less typical paths of advancement exist in the design and development of today’s vehicle diagnostic software and tools or mechanics aids.

To qualify for this certificate, you must provide evidence demonstrating that your skills and knowledge align with the courser’s learning outcomes. This evidence can take various forms. Demonstrating your current proficiency at a comparable level can be done through a CV (your student support representative can assist with this), an employment letter, or an employment contract.

Additionally, documents from prior work or educational experiences, such as references from licensed tradespeople you’ve collaborated with, apprenticeship records, academic transcripts, or assessments from relevant past qualifications, all contribute to the Recognition of Prior Learning (RPL) process. You can also submit proof of overseas qualifications or visual evidence of your work, especially for practical roles.

Required documents
ID
Resume
Payslips/work contract/ABN if self-employed
Photos/videos (for practical roles)
Risk Assessment and Management Documents
Incident Report Forms
Plans and Specifications
Job Cards
Quotes/Invoices

Anywhere in Australia, you can obtain a certification with a nationally acknowledged credential.
Get certified within four weeks of receiving the evidence
Recognized Registered Training Organisation Accreditation Customer Satisfaction Guarantee
Get a FREE RPL quote right now!

  • Grenfell Institute of Technology Adelaide RTO: 45979
  • Trinity Institute (Australia) RTO: 41310
  • Institute of Intellect Blending RTO: 41282
  • IH Sydney Training Services RTO: 91109
  • Berkeley Business Institute RTO: 40693
  • Danford College RTO: 21979
  • Elizabeth Institute of Australia: 41286
  • Bayside English College: 21974
  • Melbourne City College Australia: 45140
  • Wattle College: 45676
  • Skillset Training: 41436
  • Astley English College Australia
  • Australia Institute of Business and Technology: 41138
  • Australian Vocational Training Academy: 45879
  • National Polytechnic Of Australia: 45960 
  • Reach Community College: 40747

DO YOU WANT TO TEST YOUR SKILLS?

Take a free, 60-second skill test

We have up-to-date schedules, and contact information, & let you book appointments online.

Qualification Description

Qualification Description

This qualification covers competencies to select components, install, set up, test, fault find, repair and maintain refrigeration systems and equipment that apply to food storage and preservation, and air conditioning and air distribution equipment in buildings and premises. It includes regulatory requirements for purchasing and handling refrigerants.

Competency development activities in this qualification are subject to regulations directly related to licencing. A relevant contract of training through an apprenticeship or relevant employment may be required to enable the application of the required knowledge and skills to on the job work activities and environments.

Refrigerant Handling Licence:

The achievement of the qualification meets the training components for the full national Refrigerant Handling Licence which is required to work on refrigeration and air conditioning equipment that carries the risk of a fluorocarbon refrigerant being emitted while decanting the refrigerant or manufacturing, installing, commissioning, servicing, maintaining or decommissioning refrigeration and air conditioning equipment.

Refrigeration and Air Conditioning Occupational Licence:

Additional and/or other conditions may apply in some jurisdictions subject to regulations related to refrigeration/air conditioning work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.

Electrical Occupation Licence:

The achievement of this qualification with the core restricted electrical units meet the electrical regulatory requirements for related restricted electrical work in most state/territories. This is required to work on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).

Entry Requirements


There are no entry requirements for this qualification.

Packaging Rules

A total of 1210 weighting points  comprising:

1070 core weighting points  listed below; plus

140 general elective weighting points  from the general elective units listed below.

Choose a total of 140 weighting points  elective units from the list below, of which between 0 and 60 weighting points  can be taken from Group A; and between 80 and 140 weighting points  must be taken from Group B; or all electives units of 140 weighting points  can be taken from Group B.

Up to 30 weighting points  of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC).

There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisites Companion Volume.

Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.

Core Units

Core units  

Weighting Points 

UEECD0007

Apply work health and safety regulations, codes and practices in the workplace

20

UEECD0016

Document and apply measures to control WHS risks associated with electrotechnology work*

20

UEECD0019

Fabricate, assemble and dismantle utilities industry components*

40

UEECD0020

Fix and secure electrotechnology equipment*

20

UEECD0042

Solve problems in ELV single path circuits*

40

UEECD0051

Use drawings, diagrams, schedules, standards, codes and specifications*

40

UEECO0010

Participate in refrigeration and air conditioning work and competency development activities

60

UEERA0031

Diagnose and rectify faults in air conditioning and refrigeration control systems*

60

UEERA0035

Establish the basic operating conditions of air conditioning systems*

20

UEERA0036

Establish the basic operating conditions of vapour compression systems*

60

UEERA0044

Find and rectify faults in single phase motors and associated controls*

40

UEERA0045

Find and rectify faults in three phase motors and associated controls*

30

UEERA0050

Install refrigerant pipe work, flow controls and accessories*

60

UEERA0051

Install, commission, service and maintain air conditioning systems*

80

UEERA0052

Install, commission, service and maintain low temperature systems*

40

UEERA0053

Install, commission, service and maintain medium temperature systems*

60

UEERA0059

Prepare and connect refrigerant tubing and fittings*

40

UEERA0062

Recover and charge refrigerants*

40

UEERA0079

Safely handle refrigerants and lubricants*

40

UEERA0081

Select refrigerant piping, accessories and associated controls*

40

UEERA0092

Solve problems in low voltage refrigeration and air conditioning circuits*

40

UEERA0094

Verify functionality and compliance of refrigeration and air conditioning installations*

40

UEERE0001

Apply environmentally and sustainable procedures in the energy sector

20

UEERL0001

Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply*

20

UEERL0002

Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.*

20

UEERL0004

Disconnect – reconnect electrical equipment connected to low voltage (LV) installation wiring*

60

UEERL0005

Locate and rectify faults in low voltage (LV) electrical equipment using set procedures*

20

Group A: Imported and common elective units 

Weighting Points 

BSBOPS203

Deliver a service to customers

20

CPCWHS1001

Prepare to work safely in the construction industry

10

HLTAID009

Provide cardiopulmonary resuscitation

10

HLTAID011

Provide First Aid

10

ICTICT214

Operate application software packages

20

UEECD0011

Comply with scheduled and preventative maintenance program processes

20

UEECD0035

Provide basic instruction in the use of electrotechnology apparatus

20

UEECO0002

Maintain documentation

20

UEECO0015

Provide quotations for installation or service jobs

20

UEECO0017

Source and purchase material/parts for installation or service jobs

20

UETDRMP007

Perform rescue from a live low voltage panel*

20

Group B: Qualification elective units 

Weighting Points 

UEEIC0013

Develop, enter and verify discrete control programs for programmable controllers*

60

UEERA0005

Apply safety awareness and legal requirements for ammonia refrigerant

10

UEERA0006

Apply safety awareness and legal requirements for carbon dioxide refrigerant

10

UEERA0007

Apply safety awareness and legal requirements for flammable refrigerants

10

UEERA0046

Install and commission ammonia refrigeration systems, components and associated equipment*

20

UEERA0047

Install and commission carbon dioxide refrigeration systems, components and associated equipment*

20

UEERA0048

Install and commission flammable refrigerant air conditioning and refrigeration systems*

20

UEERA0054

Maintain microbial control of refrigeration and air conditioning systems

20

UEERA0057

Operate ammonia refrigeration plant*

40

UEERA0065

Repair and service ammonia refrigeration systems*

20

UEERA0066

Repair and service carbon dioxide refrigeration systems*

20

UEERA0067

Repair and service secondary refrigeration systems*

20

UEERA0068

Repair and service self-contained carbon dioxide refrigeration and heat pump systems*

20

UEERA0069

Resolve problems in beverage dispensers*

40

UEERA0070

Resolve problems in central plant air conditioning systems*

40

UEERA0071

Resolve problems in dairy refrigeration systems*

20

UEERA0072

Resolve problems in hydronic systems*

40

UEERA0073

Resolve problems in ice making systems*

20

UEERA0074

Resolve problems in industrial refrigeration systems*

20

UEERA0075

Resolve problems in post-mix refrigeration systems*

20

UEERA0076

Resolve problems in refrigerated beverage vending cabinets*

20

UEERA0077

Resolve problems in transport refrigeration systems*

20

UEERA0078

Resolve problems in ultra-low temperature refrigeration systems*

20

UEERA0084

Service and repair self-contained flammable refrigerants air conditioning and refrigeration systems*

20

UEERA0097

Install, commission, service and maintain variable refrigerant flow air conditioning systems*

40

UEERA0098

Inspect, test and repair fire and smoke control features of mechanical services systems*

80

Four Easy Steps To Get Qualified

Free Skills Assessment

Speak to ITEC Australia about your goals, and allow us to guide you towards the qualification that will help you reach them.

Portfolio of Experience

Your dedicated consultant will guide you through the process of putting together a portfolio of evidence. This can contain overseas qualifications, transcripts, certificates, photos and videos, samples or work examples, letters of reference, your current resume, etc.

Evidence Review

Once one of our partner registered training organisations (RTOs) has assessed your portfolio, the assessor assigned to your case may be in touch if any additional evidence is required. If you have any weak areas, the RTO may assign a trainer to upskill you at no cost to you.

You’re Qualified

ITEC Australia is partnered with Registered Training Organisations whose qualifications are nationally recognised in Australia, and are the same as the qualification you would receive from full time study. Qualifications can also be useful for licensing or immigration purposes.