24/7 hotline
  • Monday to Friday 9 AM to 6 PM
Facebook Youtube Ovaicon-instagram

MEM30319 - Certificate III in Engineering - Fabrication Trade

Put your training and experience to use with ITEC’s RPL services and earn a nationally recognised qualification with a MEM30319 – Certificate III in Engineering – Fabrication Trade via our RTO partners.

Qualification Overview

Qualification Name:

Certificate III in Engineering – Fabrication Trade

Qualification Code and Units of Competency:

MEM30319

Duration:

Within four weeks of receiving sufficient and complying evidence of competency in all applied for units of competency.

Start your career in engineering and fabrication with Certificate III in engineering fabrication trade. Engineers and tradies of all skill levels are eligible for this qualification. This certificate will get you a formal qualification and train you in the practical skills of the fabrication trade. Apart from a range of fabrication techniques, you will also be trained in work, health and safety regulations and project planning.

Please find our eligibility criteria below:

  • The candidate must be a citizen or permanent resident of Australia. Alternatively, the candidate must be able to work full-time in Australia.
  • In addition, the applicant must be employed as an apprentice or have a training contract with their employer.

Get in touch to understand how to get your certification! You can find our contact details below.

To qualify for this certificate, you must provide evidence demonstrating that your skills and knowledge align with the courser’s learning outcomes. This evidence can take various forms. Demonstrating your current proficiency at a comparable level can be done through a CV (your student support representative can assist with this), an employment letter, or an employment contract.

Additionally, documents from prior work or educational experiences, such as references from licensed tradespeople you’ve collaborated with, apprenticeship records, academic transcripts, or assessments from relevant past qualifications, all contribute to the Recognition of Prior Learning (RPL) process. You can also submit proof of overseas qualifications or visual evidence of your work, especially for practical roles.

Required documents
ID
Resume
Payslips/work contract/ABN if self-employed
Photos/videos (for practical roles)
Risk Assessment and Management Documents
Incident Report Forms
Plans and Specifications
Job Cards
Quotes/Invoices

Anywhere in Australia, you can obtain a certification with a nationally acknowledged credential.
Get certified within four weeks of receiving the evidence
Recognized Registered Training Organisation Accreditation Customer Satisfaction Guarantee
Get a FREE RPL quote right now!

Noble Training Academy RTO: 70201
Unique College of Technology RTO: 91358
Alpha Training & Recognition Pty Ltd RTO: 45282
Australian Institute of Accreditation Pty Ltd RTO: 45009
Delacroy Training RTO: 32267

DO YOU WANT TO TEST YOUR SKILLS?

Take a free, 60-second skill test

We have up-to-date schedules, and contact information, & let you book appointments online.

Click here

Four Easy Steps To Get Qualified

Free Skills Assessment

Speak to ITEC Australia about your goals, and allow us to guide you towards the qualification that will help you reach them.

Portfolio of Experience

Your dedicated consultant will guide you through the process of putting together a portfolio of evidence. This can contain overseas qualifications, transcripts, certificates, photos and videos, samples or work examples, letters of reference, your current resume, etc.

Evidence Review

Once one of our partner registered training organisations (RTOs) has assessed your portfolio, the assessor assigned to your case may be in touch if any additional evidence is required. If you have any weak areas, the RTO may assign a trainer to upskill you at no cost to you.

You’re Qualified

ITEC Australia is partnered with Registered Training Organisations whose qualifications are nationally recognised in Australia, and are the same as the qualification you would receive from full time study. Qualifications can also be useful for licensing or immigration purposes.

Qualification Description

This qualification defines the skills and knowledge required of an engineering tradesperson – fabrication within metal, engineering, manufacturing and associated industries. The qualification has been specifically developed to meet the needs of apprentices in the above trade.

This qualification must be undertaken through a Training Contract or through formal trade recognition assessment processes.

The skills associated with this qualification are intended to apply to a wide range of fabrication work, including undertaking metal fabrication, structural steel erection, sheetmetal work, welding, blacksmithing and surface finishing.

This qualification is designed to provide an industry recognised skills profile related to trade work as an Engineering Tradesperson – Fabrication.

Assessment of some units of competency must, where indicated, include evidence of the candidate’s performance in a functioning workplace where there is a sufficient range of appropriate tasks and materials to cover the scope of application of those units. All outcomes must reflect the standard of performance inherent in the job.

No licensing, legislative or certification requirements apply to this qualification at the time of publication. However, in some jurisdictions units in this qualification may relate to licensing or regulatory requirements. Local regulations should be checked.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To be awarded the MEM30319 Certificate III in Engineering – Fabrication Trade, units of competency to the value of 96 points must be achieved, chosen as outlined below:

  • all core units of competency listed below (totalling 33 points)
  • elective units of competency to a minimum value of 40 points from Groups A, B, C, D, E, F and G as described below
  • elective units of competency to a maximum value of 23 points from Group H to bring the total value to 96 points.

 

To be awarded the MEM30319 Certificate III in Engineering – Fabrication Trade (Boilermaking), units of competency to the value of 96 points must be achieved, chosen as outlined below:

  • all core units of competency listed below (totalling 33 points)
  • elective units of competency to a minimum value of 40 points from Group B as described below
  • elective units of competency to a maximum value of 23 points from Group H to bring the total value to 96 points.

 

To be awarded the MEM30319 Certificate III in Engineering – Fabrication Trade (Welding), units of competency to the value of 96 points must be achieved, chosen as outlined below:

  • all core units of competency listed below (totalling 33 points)
  • elective units of competency to a minimum value of 40 points from Group C as described below
  • elective units of competency to a maximum value of 23 points from Group H to bring the total value to 96 points.

 

To be awarded the MEM30319 Certificate III in Engineering – Fabrication Trade (Boilermaking/Welding), units of competency to the value of 96 points must be achieved, chosen as outlined below:

  • all core units of competency listed below (totalling 33 points)
  • elective units of competency to a minimum value of 40 points from Group D as described below
  • elective units of competency to a maximum value of 23 points from Group H to bring the total value to 6 points.

 

To be awarded the MEM30319 Certificate III in Engineering – Fabrication Trade (Sheetmetal working), units of competency to the value of 96 points must be achieved, chosen as outlined below:

  • all core units of competency listed below (totalling 33 points)
  • elective units of competency to a minimum value of 40 points from Group E as described below
  • elective units of competency to a maximum value of 23 points from Group H to bring the total value to 96 points.

 

To be awarded the MEM30319 Certificate III in Engineering – Fabrication Trade (Blacksmithing), units of competency to the value of 96 points must be achieved, chosen as outlined below:

  • all core units of competency listed below (totalling 33 points)
  • elective units of competency to a minimum value of 40 points from Group F as described below
  • elective units of competency to a maximum value of 23 points from Group H to bring the total value to 96 points.

 

To be awarded the MEM30319 Certificate III in Engineering – Fabrication Trade (Surface Finishing), units of competency to the value of 96 points must be achieved, chosen as outlined below:

  • all core units of competency listed below (totalling 33 points)
  • elective units of competency to a minimum value of 40 points from Group G as described below
  • elective units of competency to a maximum value of 23 points from Group H to bring the total value to 96 points.

 

Appropriate Group H elective units to the value of 8 points may be chosen from this Training Package, other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III. Only select units that would be suitable for occupational outcomes in a fabrication trade environment.

 

Registered Training Organisations (RTOs) must seek a determination from the industry parties in respect of the allocation of points values for units of competency drawn from other Training Packages or accredited courses. Determination of points requests are to be submitted to the industry parties through Innovation and Business Skills Australia (IBSA) Manufacturing. Refer to the MEM Companion Volume Implementation Guide for information on determination of unit points values.

 

Prerequisites 

Points associated with prerequisites count towards the total. Units with prerequisite requirements are marked with an asterisk (refer to the individual units for details). All prerequisites are included in the units listed.

 

Core units of competency  

 

Unit code 

Unit title 

P 

Prereq 

MEM09002

Interpret technical drawing

4

*

MEM11011

Undertake manual handling

2

*

MEM12023

Perform engineering measurements

5

*

MEM12024

Perform computations

3

*

MEM13015

Work safely and effectively in manufacturing and engineering

2

 

MEM14006

Plan work activities

4

*

MEM16006

Organise and communicate information

2

*

MEM16008

Interact with computing technology

2

*

MEM17003

Assist in the provision of on-the-job training

2

*

MEM18001

Use hand tools

2

*

MEM18002

Use power tools/hand held operations

2

*

MSMENV272

Participate in environmentally sustainable work practices

3

 

 

Elective units of competency 

 

Packaging for a generic fabrication trade qualification – choose a minimum value of 40 points from Group A.

 

Packaging for a trade specialisation – choose a minimum value of 40 points from one of either  Group B or C or D or E or F or G.

 

Group A – Fabrication Trade generic electives 

 

Unit code 

Unit title 

P 

Prereq 

MEM05003

Perform soft soldering

2

*

MEM05004

Perform routine oxy fuel gas welding

2

*

MEM05005

Carry out mechanical cutting

2

*

MEM05006

Perform brazing and/or silver soldering

2

*

MEM05007

Perform manual heating and thermal cutting

2

*

MEM05008

Perform advanced manual thermal cutting, gouging and shaping

2

*

MEM05009

Perform automated thermal cutting

2

*

MEM05010

Apply fabrication, forming and shaping techniques

8

*

MEM05011

Assemble fabricated components

8

*

MEM05012

Perform routine manual metal arc welding

2

*

MEM05014

Monitor quality of production welding/fabrications

2

*

MEM05015

Weld using manual metal arc welding process

4

*

MEM05016

Perform advanced welding using manual metal arc welding process

4

*

MEM05017

Weld using gas metal arc welding process

4

*

MEM05018

Perform advanced welding using gas metal arc welding process

4

*

MEM05019

Weld using gas tungsten arc welding process

4

*

MEM05020

Perform advanced welding using gas tungsten arc welding process

4

*

MEM05022

Perform advanced welding using oxy acetylene welding process

6

*

MEM05023

Weld using submerged arc welding process

4

*

MEM05036

Repair, replace and/or modify fabrications

4

*

MEM05037

Perform geometric development

6

*

MEM05041

Weld using flame powder spraying

4

*

MEM05047

Weld using flux core arc welding process

4

*

MEM05048

Perform advanced welding using flux core arc welding process

4

*

MEM05049

Perform routine gas tungsten arc welding

2

*

MEM05050

Perform routine gas metal arc welding

2

*

MEM05051

Select welding processes

2

*

MEM05052

Apply safe welding practices

4

*

MEM05053

Set and edit computer controlled thermal cutting machines

4

*

MEM05055

Weld using oxy fuel gas welding process

4

*

MEM05056

Perform routine flux core arc welding

2

*

MEM05057

Perform routine submerged arc welding

2

*

MEM08010

Manually finish/polish materials

6

*

MEM09011

Apply basic engineering design concepts

6

*

MEM12007

Mark off/out structural fabrications and shapes

4

*

MEM18055

Dismantle, replace and assemble engineering components

3

*

 

Group B – Boilermaking Trade specialisation electives 

 

Unit code 

Unit title 

P 

Prereq 

MEM05004

Perform routine oxy fuel gas welding

2

*

MEM05005

Carry out mechanical cutting

2

*

MEM05007

Perform manual heating and thermal cutting

2

*

MEM05008

Perform advanced manual thermal cutting, gouging and shaping

2

*

MEM05009

Perform automated thermal cutting

2

*

MEM05010

Apply fabrication, forming and shaping techniques

8

*

MEM05011

Assemble fabricated components

8

*

MEM05012

Perform routine manual metal arc welding

2

*

MEM05015

Weld using manual metal arc welding process

4

*

MEM05017

Weld using gas metal arc welding process

4

*

MEM05019

Weld using gas tungsten arc welding process

4

*

MEM05023

Weld using submerged arc welding process

4

*

MEM05036

Repair, replace and/or modify fabrications

4

*

MEM05037

Perform geometric development

6

*

MEM05047

Weld using flux core arc welding process

4

*

MEM05049

Perform routine gas tungsten arc welding

2

*

MEM05050

Perform routine gas metal arc welding

2

*

MEM05051

Select welding processes

2

*

MEM05052

Apply safe welding practices

4

*

MEM05055

Weld using oxy fuel gas welding process

4

*

MEM05056

Perform routine flux core arc welding

2

*

MEM05057

Perform routine submerged arc welding

2

*

MEM09011

Apply basic engineering design concepts

6

*

MEM12007

Mark off/out structural fabrications and shapes

4

*

MEM18055

Dismantle, replace and assemble engineering components

3

*

 

Group C  – Welding Trade specialisation electives 

 

Unit code 

Unit title 

P 

Prereq 

MEM05004

Perform routine oxy fuel gas welding

2

*

MEM05005

Carry out mechanical cutting

2

*

MEM05006

Perform brazing and/or silver soldering

2

*

MEM05007

Perform manual heating and thermal cutting

2

*

MEM05011

Assemble fabricated components

8

*

MEM05012

Perform routine manual metal arc welding

2

*

MEM05014

Monitor quality of production welding/fabrications

2

*

MEM05015

Weld using manual metal arc welding process

4

*

MEM05016

Perform advanced welding using manual metal arc welding process

4

*

MEM05017

Weld using gas metal arc welding process

4

*

MEM05018

Perform advanced welding using gas metal arc welding process

4

*

MEM05019

Weld using gas tungsten arc welding process

4

*

MEM05020

Perform advanced welding using gas tungsten arc welding process

4

*

MEM05022

Perform advanced welding using oxy acetylene welding process

6

*

MEM05023

Weld using submerged arc welding process

4

*

MEM05041

Weld using flame powder spraying

4

*

MEM05047

Weld using flux core arc welding process

4

*

MEM05048

Perform advanced welding using flux core arc welding process

4

*

MEM05049

Perform routine gas tungsten arc welding

2

*

MEM05050

Perform routine gas metal arc welding

2

*

MEM05051

Select welding processes

2

*

MEM05052

Apply safe welding practices

4

*

MEM05055

Weld using oxy fuel gas welding process

4

*

MEM05056

Perform routine flux core arc welding

2

*

MEM05057

Perform routine submerged arc welding

2

*

 

Group D  – Boilermaking/Welding Trade specialisation electives 

 

Unit code 

Unit title 

P 

Prereq 

MEM05004

Perform routine oxy fuel gas welding

2

*

MEM05005

Carry out mechanical cutting

2

*

MEM05007

Perform manual heating and thermal cutting

2

*

MEM05008

Perform advanced manual thermal cutting, gouging and shaping

2

*

MEM05009

Perform automated thermal cutting

2

*

MEM05010

Apply fabrication, forming and shaping techniques

8

*

MEM05011

Assemble fabricated components

8

*

MEM05012

Perform routine manual metal arc welding

2

*

MEM05015

Weld using manual metal arc welding process

4

*

MEM05016

Perform advanced welding using manual metal arc welding process

4

*

MEM05017

Weld using gas metal arc welding process

4

*

MEM05018

Perform advanced welding using gas metal arc welding process

4

*

MEM05019

Weld using gas tungsten arc welding process

4

*

MEM05020

Perform advanced welding using gas tungsten arc welding process

4

*

MEM05022

Perform advanced welding using oxy acetylene welding process

6

*

MEM05023

Weld using submerged arc welding process

4

*

MEM05036

Repair, replace and/or modify fabrications

4

*

MEM05037

Perform geometric development

6

*

MEM05041

Weld using flame powder spraying

4

*

MEM05047

Weld using flux core arc welding process

4

*

MEM05048

Perform advanced welding using flux core arc welding process

4

*

MEM05049

Perform routine gas tungsten arc welding

2

*

MEM05050

Perform routine gas metal arc welding

2

*

MEM05051

Select welding processes

2

*

MEM05052

Apply safe welding practices

4

*

MEM05055

Weld using oxy fuel gas welding process

4

*

MEM05056

Perform routine flux core arc welding

2

*

MEM05057

Perform routine submerged arc welding

2

*

MEM09011

Apply basic engineering design concepts

6

*

MEM12007

Mark off/out structural fabrications and shapes

4

*

MEM18055

Dismantle, replace and assemble engineering components

3

*

 

Group E  – Sheetmetal working Trade specialisation electives 

 

Unit code 

Unit title 

P 

Prereq 

MEM05003

Perform soft soldering

2

*

MEM05004

Perform routine oxy fuel gas welding

2

*

MEM05005

Carry out mechanical cutting

2

*

MEM05006

Perform brazing and/or silver soldering

2

*

MEM05007

Perform manual heating and thermal cutting

2

*

MEM05010

Apply fabrication, forming and shaping techniques

8

*

MEM05011

Assemble fabricated components

8

*

MEM05012

Perform routine manual metal arc welding

2

*

MEM05015

Weld using manual metal arc welding process

4

*

MEM05017

Weld using gas metal arc welding process

4

*

MEM05019

Weld using gas tungsten arc welding process

4

*

MEM05037

Perform geometric development

6

*

MEM05049

Perform routine gas tungsten arc welding

2

*

MEM05050

Perform routine gas metal arc welding

2

*

MEM05051

Select welding processes

2

*

MEM05052

Apply safe welding practices

4

*

MEM05055

Weld using oxy fuel gas welding process

4

*

MEM05056

Perform routine flux core arc welding

2

*

MEM05057

Perform routine submerged arc welding

2

*

MEM09011

Apply basic engineering design concepts

6

*

MEM12007

Mark off/out structural fabrications and shapes

4

*

MEM18055

Dismantle, replace and assemble engineering components

3

*

 

Group F – Blacksmithing Trade specialisation electives 

 

Unit code 

Unit title 

P 

Prereq 

MEM05005

Carry out mechanical cutting

2

*

MEM05007

Perform manual heating and thermal cutting

2

*

MEM05012

Perform routine manual metal arc welding

2

*

MEM05049

Perform routine gas tungsten arc welding

2

*

MEM05050

Perform routine gas metal arc welding

2

*

MEM05056

Perform routine flux core arc welding

2

*

MEM05057

Perform routine submerged arc welding

2

*

MEM06001

Perform hand forging

4

*

MEM06002

Perform hammer forging

4

*

MEM06003

Carry out heat treatment

6

*

MEM06004

Select heat treatment processes and test finished product

6

*

MEM06005

Perform drop and upset forging

4

*

MEM06006

Repair springs

4

*

MEM06007

Perform basic incidental heat/quenching, tempering and annealing

2

*

MEM06008

Hammer forge complex shapes

4

*

MEM06009

Hand forge complex shapes

4

*

 

Group G  – Surface Finishing Trade specialisation electives 

 

Unit code 

Unit title 

P 

Pre-req 

MEM08001

Perform wire, jig and barrel load/unload work

4

*

MEM08002

Pre-treat work for subsequent surface coating

4

*

MEM08003

Perform electroplating operations

6

*

MEM08004

Finish work using wet, dry and vapour deposition methods

4

*

MEM08005

Prepare and produce specialised coatings

4

*

MEM08006

Produce clear and/or coloured and/or sealed anodised films on aluminium

2

*

MEM08007

Control surface finish production and finished product quality

4

*

MEM08008

Operate and control surface finishing waste treatment process

3

*

MEM08009

Make up solutions

2

*

MEM08010

Manually finish/polish materials

6

*

MEM08011

Prepare surfaces using solvents and/or mechanical means

2

*

MEM08012

Prepare surfaces by abrasive blasting (basic)

4

*

MEM08013

Prepare surfaces by abrasive blasting (advanced)

4

*

MEM08014

Apply protective coatings (basic)

4

*

MEM08015

Apply protective coatings (advanced)

4

*

MEM08016

Control blast coating by-products, materials and emissions

1

*

MEM08018

Electroplate engineering coatings

6

*

MEM08019

Electroplate protective finishes

6

*

MEM08020

Electroplate decorative finishes

6

*

MEM11009

Handle/move bulk fluids/gases

4

*

 

Group H – General electives 

 

Unit code 

Unit title 

P 

Prereq 

MEM05001

Perform manual soldering/desoldering – electrical/electronic components

4

*

MEM05002

Perform high reliability soldering and desoldering

4

*

MEM05003

Perform soft soldering

2

*

MEM05004

Perform routine oxy fuel gas welding

2

*

MEM05005

Carry out mechanical cutting

2

*

MEM05006

Perform brazing and/or silver soldering

2

*

MEM05007

Perform manual heating and thermal cutting

2

*

MEM05008

Perform advanced manual thermal cutting, gouging and shaping

2

*

MEM05009

Perform automated thermal cutting

2

*

MEM05010

Apply fabrication, forming and shaping techniques

8

*

MEM05011

Assemble fabricated components

8

*

MEM05012

Perform routine manual metal arc welding

2

*

MEM05014

Monitor quality of production welding/fabrications

2

*

MEM05015

Weld using manual metal arc welding process

4

*

MEM05016

Perform advanced welding using manual metal arc welding process

4

*

MEM05017

Weld using gas metal arc welding process

4

*

MEM05018

Perform advanced welding using gas metal arc welding process

4

*

MEM05019

Weld using gas tungsten arc welding process

4

*

MEM05020

Perform advanced welding using gas tungsten arc welding process

4

*

MEM05022

Perform advanced welding using oxy acetylene welding process

6

*

MEM05023

Weld using submerged arc welding process

4

*

MEM05027

Perform aluminothermic welding

2

*

MEM05036

Repair, replace and/or modify fabrications

4

*

MEM05037

Perform geometric development

6

*

MEM05041

Weld using flame powder spraying

4

*

MEM05047

Weld using flux core arc welding process

4

*

MEM05048

Perform advanced welding using flux core arc welding process

4

*

MEM05049

Perform routine gas tungsten arc welding

2

*

MEM05050

Perform routine gas metal arc welding

2

*

MEM05051

Select welding processes

2

*

MEM05052

Apply safe welding practices

4

*

MEM05053

Set and edit computer controlled thermal cutting machines

4

*

MEM05055

Weld using oxy fuel gas welding process

4

*

MEM05056

Perform routine flux core arc welding

2

*

MEM05057

Perform routine submerged arc welding

2

*

MEM06001

Perform hand forging

4

*

MEM06002

Perform hammer forging

4

*

MEM06003

Carry out heat treatment

6

*

MEM06004

Select heat treatment processes and test finished product

6

*

MEM06005

Perform drop and upset forging

4

*

MEM06006

Repair springs

4

*

MEM06007

Perform basic incidental heat/quenching, tempering and annealing

2

*

MEM06008

Hammer forge complex shapes

4

*

MEM06009

Hand forge complex shapes

4

*

MEM07001

Perform operational maintenance of machines/equipment

2

*

MEM07015

Set computer controlled machines and processes

2

*

MEM07016

Set and edit computer controlled machines and processes

4

*

MEM07024

Operate and monitor machine and process

4

*

MEM07028

Operate computer controlled machines and processes

2

*

MEM07030

Perform basic metal spinning lathe operations

8

*

MEM07031

Perform complex metal spinning lathe operations

4

*

MEM07032

Use workshop machines for basic operations

2

*

MEM08001

Perform wire, jig and barrel load/unload work

4

*

MEM08002

Pre-treat work for subsequent surface coating

4

*

MEM08003

Perform electroplating operations

6

*

MEM08004

Finish work using wet, dry and vapour deposition methods

4

*

MEM08005

Prepare and produce specialised coatings

4

*

MEM08006

Produce clear and/or coloured and/or sealed anodised films on aluminium

2

*

MEM08007

Control surface finish production and finished product quality

4

*

MEM08008

Operate and control surface finishing waste treatment process

3

*

MEM08009

Make up solutions

2

*

MEM08010

Manually finish/polish materials

6

*

MEM08011

Prepare surfaces using solvents and/or mechanical means

2

*

MEM08012

Prepare surfaces by abrasive blasting (basic)

4

*

MEM08013

Prepare surfaces by abrasive blasting (advanced)

4

*

MEM08014

Apply protective coatings (basic)

4

*

MEM08015

Apply protective coatings (advanced)

4

*

MEM08016

Control blast coating by-products, materials and emissions

1

*

MEM08018

Electroplate engineering coatings

6

*

MEM08019

Electroplate protective finishes

6

*

MEM08020

Electroplate decorative finishes

6

*

MEM09003

Prepare basic engineering drawing

8

*

MEM09011

Apply basic engineering design concepts

6

*

MEM10001

Erect structures

4

*

MEM10010

Install pipework and pipework assemblies

4

*

MEM11001

Erect/dismantle scaffolding and equipment

4

*

MEM11009

Handle/move bulk fluids/gases

4

*

MEM11010

Operate mobile load shifting equipment

4

*

MEM11016

Order materials

2

*

MEM11022

Operate fixed/moveable load shifting equipment

4

*

MEM12007

Mark off/out structural fabrications and shapes

4

*

MEM12025

Use graphical techniques and perform simple statistical computations

2

*

MEM13001

Perform emergency first aid

1

*

MEM13002

Undertake work health and safety activities in the workplace

3

*

MEM13003

Work safely with industrial chemicals and materials

2

*

MEM15001

Perform basic statistical quality control

2

*

MEM15003

Use improvement processes in team activities

4

*

MEM15004

Perform inspection

2

*

MEM16004

Perform internal/external customer service

2

*

MEM16005

Operate as a team member to conduct manufacturing, engineering or related activities

2

*

MEM18003

Use tools for precision work

4

*

MEM18011

Shut down and isolate machines/equipment

2

*

MEM18055

Dismantle, replace and assemble engineering components

3

*

MEM24001B

Perform basic penetrant testing

2

*

MEM24003B

Perform basic magnetic particle testing

2

*

MEM24007B

Perform ultrasonic thickness testing

2

*

MSMENV472

Implement and monitor environmentally sustainable work practices

4

 

TLILIC0003

Licence to operate a forklift truck

0

 

TLILIC0002

Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)

1

 

Interested in this qualification?

    We help you to realise your true potential and reach your career goals. 

    Facebook Ovaicon-instagram Youtube

    Links

    Services

    Contact

    Copyright © 2023 International Training and Education Counsel. Developed by  Quadque Technologies Ltd.